Technical specifications of the Mega Pi controller:

● Model: Makeblock Mega Pi

● Microcontroller: ATmega2560-16AU

● Power Supply Voltage: 6...12 V DC

● Operating Voltage: 5 V

● I/O Ports: 43

● Serial Ports: 3

● I2C Interface: Yes

● SPI Interface: Yes

● Analog Inputs: 15

● Current per Port: 20 mA

● Flash Memory: 256 KB

● SRAM: 8 KB

● EEPROM: 4 KB

● Clock Frequency: 16 MHz

● Dimensions: 85 x 63 mm

The kit includes 5 sensors and 4 color-coded RJ25 ports for connecting additional sensors and actuators. Wireless control is possible via a tablet, phone, and your computer's Bluetooth adapter. The convenient sensor and actuator connections do not require soldering.

● 14 step-by-step instructions for graphical programming (electronic version);

● The set consists of 536 parts;

● Sensors in the kit: 19 electronic components;

● Communication: Bluetooth/2.4 GHz, 2 motors at 400 RPM with a gearbox.

The kit components are made of anodized aluminum, capable of withstanding a load of 70 kg. It includes assembly instructions for building 10 robots. The standard distance between holes on the panels and rails is 8 mm.

Included parts:

● Robot constructor,

● Beam 0824-016 - 4 pcs,

● Beam 0824-032 - 5 pcs,

● Beam 0824-064 - 3 pcs,

● Beam 0824-128 - 2 pcs,

● Beam 0824-176 - 1 pcs,

● Beam 0824-192 - 2 pcs,

● Beam 0808-024 - 2 pcs,

● Beam 0412-076 - 4 pcs,

● Beam 0412-092 - 4 pcs,

● Beam 0412-140 - 4 pcs,

● Beam 0412-188 - 6 pcs,

● Beam 0412-220 - 2 pcs,

● Plate 0324-056 - 2 pcs,

● Plate 0324-088 - 3 pcs,

● Mount P3 - 2 pcs,

● Motor mount for 25 mm DC motor - 3 pcs,

● Mount 3×3 - 4 pcs,

● Plate 3×6 - 2 pcs,

● Plate 7×9-B - 1 pcs,

● Shaft connector 4 mm - 6 pcs,

● Stiffening rib 1616-08-M4 - 4 pcs,

● Rotating platform 34×24 mm - 1 pcs,

● Mounting plate - 1 pcs,

● Motor mount 25 mm - 2 pcs,

● Acrylic mount for Mega Pi - 2 pcs,

● Rubber membrane - 4 pcs,

● Bus 90TB - 4 pcs,

● Plastic gear 90T - 6 pcs,

● Plastic gear 8T - 3 pcs,

● Plastic gear 56T - 2 pcs,

● Plastic gear 72T - 2 pcs,

● Smartphone mount 360° - 1 pcs,

● Track 80×139 mm - 2 pcs,

● Holder for 6 AA batteries - 1 pcs,

● Copper sleeve with flange 4×8×4 mm - 12 pcs,

● Sleeve 4 mm - 12 pcs,

● Threaded shaft 4×39 mm - 6 pcs,

● Shaft D4×50 mm - 2 pcs,

● Shaft D4×88 mm - 2 pcs,

● Shaft D4×160 mm - 1 pcs,

● Brass pin M4×16 - 4 pcs,

● Plastic ring 4×7×2 - 4 pcs,

● Plastic ring 4×7×3 - 8 pcs,

● Plastic ring 4×7×10 - 2 pcs,

● Plastic rivet 4060 - 20 pcs,

● Plastic rivet 4100 - 20 pcs,

● Plastic rivet 4120 - 20 pcs,

● Countersunk screw M3×5 - 12 pcs,

● Countersunk screw M3×8 - 8 pcs,

● Countersunk screw M3×8 - 6 pcs,

● Countersunk screw M3×10 - 4 pcs,

● Screw M4×8 - 50 pcs,

● Screw M4×14 - 46 pcs,

● 25 mm DC motor 9V 185 RPM - 2 pcs,

● 25 mm DC motor 9V 86 RPM - 1 pcs,

● Screw M4×30 - 4 pcs,

● Nut M4 - 47 pcs,

● Nylon lock nut M4 - 10 pcs,

● Screw M4×22 - 4 pcs,

● Screw M4×16 - 10 pcs,

● Manipulator - 1 pcs,

● Linear motion module - 1 pcs,

● Shutter - 1 pcs,

● Ultrasonic sensor - 1 pcs,

● Bluetooth module - 1 pcs,

● Board with RJ25 ports - 1 pcs,

● Driver for Mega Pi motor - 4 pcs,

● Mega Pi board - 1 pcs,

● Cable for 25 mm motor with encoder - 3 pcs,

● Three-axis accelerometer and gyroscope - 1 pcs,

● Adapter - 1 pcs,

● USB cable 1.3 m - 1 pcs,

● Cable 6P6C RJ25 - 20 cm - 2 pcs,

● Cable 6P6C RJ25 - 35 cm - 1 pcs,

● Rubber band - 10 pcs,

● Nylon tie 1.9×100 - 10 pcs